I realize that we have been taught all of our lives that zero isn't a number, rather it's a placeholder.
I have thought about this and come to the conclusion that zero is the only whole number and any other number is an increment or fraction of the base.
Counting is a logical process of repeating a cycle of increments contigent upon the base. Zero is either the beginning or end of a base cycle. When the base count is achieved, then the cycle resets to zero and repeats itself.
The following is how I have derived my logical conclusion:
Base Ten has 10 increments to reach the base.
0=Terminal Start
1 = 10%
2 = 20%
3 = 30%
4 = 40%
5 = 50%
6 = 60%
7 = 70%
8 = 80%
9 = 90%
10 = 100% Terminal Stop
Base two has only 2 increments to reach the base.
0 = Terminal Start
1 = 50%
10 = 100% Terminal Stop
In either cycle of counting each increment is a fraction of the base, except for zero. Zero percent isn't a fraction. Thus, zero is the only whole number.
In a binary table, zero in the one's column will always equate to an even number. One in the one's column will always equate to an odd number. Any other column is a catchall to hold the overflow of zero or one.
Example:
111111111110 = Even
000000000001 = Odd
Example
A light switch is in the off position. Below indicate if the light switch is on/off based upon how many times the switch is flipped.
Switch flipped 1234 times = [ ] ON [ ] OFF
Switch flipped 4321 times = [ ] ON [ ] OFF
The answer is not based upon how many times the switch is flipped but whether it has been flipped an even or odd number of times.
A switch flipped an odd number of times is in the opposite state.
A switch flipped an even number of times is in the same state.
The reason is that zero is an even number and represents the completion of a cycle. One is an odd number and represents that a cycle is incomplete.
Any incomplete cycle produces an imbalance. The completion of a cycle produces a balance.
If we examine any mathematical equation the problem and solution will always balance with each other. The equal sign symbolizes the state of balance.
EXAMPLE
2 + 2 = 4 or 2 - 2 = 0 or 2 X 2 = 4 or 2 / 2 = 0
The problem is assigned to the left side of the equation and the solution is assigned to the right side of the equation. Each side balances with each other.
The solution to any problem is to create a balance.
Zero = balance
One = imbalance
Whenever we have problems then it means that a one is hidden in the equation creating an imbalance. Eliminate the one and the problem is solved.
I have thought about this and come to the conclusion that zero is the only whole number and any other number is an increment or fraction of the base.
Counting is a logical process of repeating a cycle of increments contigent upon the base. Zero is either the beginning or end of a base cycle. When the base count is achieved, then the cycle resets to zero and repeats itself.
The following is how I have derived my logical conclusion:
Base Ten has 10 increments to reach the base.
0=Terminal Start
1 = 10%
2 = 20%
3 = 30%
4 = 40%
5 = 50%
6 = 60%
7 = 70%
8 = 80%
9 = 90%
10 = 100% Terminal Stop
Base two has only 2 increments to reach the base.
0 = Terminal Start
1 = 50%
10 = 100% Terminal Stop
In either cycle of counting each increment is a fraction of the base, except for zero. Zero percent isn't a fraction. Thus, zero is the only whole number.
In a binary table, zero in the one's column will always equate to an even number. One in the one's column will always equate to an odd number. Any other column is a catchall to hold the overflow of zero or one.
Example:
111111111110 = Even
000000000001 = Odd
Example
A light switch is in the off position. Below indicate if the light switch is on/off based upon how many times the switch is flipped.
Switch flipped 1234 times = [ ] ON [ ] OFF
Switch flipped 4321 times = [ ] ON [ ] OFF
The answer is not based upon how many times the switch is flipped but whether it has been flipped an even or odd number of times.
A switch flipped an odd number of times is in the opposite state.
A switch flipped an even number of times is in the same state.
The reason is that zero is an even number and represents the completion of a cycle. One is an odd number and represents that a cycle is incomplete.
Any incomplete cycle produces an imbalance. The completion of a cycle produces a balance.
If we examine any mathematical equation the problem and solution will always balance with each other. The equal sign symbolizes the state of balance.
EXAMPLE
2 + 2 = 4 or 2 - 2 = 0 or 2 X 2 = 4 or 2 / 2 = 0
The problem is assigned to the left side of the equation and the solution is assigned to the right side of the equation. Each side balances with each other.
The solution to any problem is to create a balance.
Zero = balance
One = imbalance
Whenever we have problems then it means that a one is hidden in the equation creating an imbalance. Eliminate the one and the problem is solved.
Last edited: