I got some concentrated H2SO4 on my lab coat on monday and when I left the lab there was only a brown stain on the lab coat so I put it in my locker. The next day I noticed an acid burn on my t-shirt, obviously caused by some acid that seeped through the lab coat. I can't walk into the lab next monday with a bit acid burn on my lab coat so if its burned I'm gonna have to get a new one. Is it likely that there will be a hole burned through the lab coat by now or are lab coats more acid resistant than the average t-shirt?
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
How long does it take strong acid to burn fabric?
- Thread starter horsebox
- Start date
In my experience, conc. H2SO4 will eat away at lab-coats. They are usually just thick, absorbent cotton and the acid will attack the cellulose in the fibres. It is likely you will end up with a hole even if you were to neutralize it with, say, 5M NaOH. Ithink after all this time it is destined for the dustbin. I would say it's a salutary warning to those that sometimes neglect to wear one, never a good idea.
I think you will find it will still cause a hole, especially if it was over, say 2M & you didn't dilute it soon after the incident. They don't appear straight away usually as Eddanco says, but expect one sooner or later. Good lab-coats are not too expensive though, and I hate them when they are all shiny and new..They never look right till you've got them covered in some nice stains and a bit of leaky biro!
I've never had much luck with diluting or neutralizing the acid after it's on the fabric. A few times I tried washing the affected area with carbonate solution, but the hole always appeared anyway.I think you will find it will still cause a hole, especially if it was over, say 2M & you didn't dilute it soon after the incident.