View Poll Results: Your favorite of the two?
- 52. This poll is closed
Valued Senior Member
Titanium vs. steel
This thread is more intended for a discussion upon the likes of favoritism, since an otherwise objective comparisons are nearly impossible due to the complexity of each material category's variability in form and purpose.
I have some inspiration from a glimpse of this forum thread, and I thought it would be fairly entertaining to repeat the topic here at Sciforums. As you may have noticed, the discussion in the link is very, errrr, uninformed. Blatantly.
Anyway, back to the topic. As someone who has some basic knowledge of materials science, I personally have a bias for steel over titanium.
What do you guys think?
had a mod but let him go
Titanium is always better (unless you need something magnetic, like a refrigerator). You can even get it fairly cheap from old russian submarines.
Inside a Klein bottle.
Oh, come on. This is comparing apples and oranges.
Looking at just the structural strength, titanium wins hands down. But steel is vastly more plentiful, and thus vastly cheaper. And steel is a lot easier to work with.
Real eyes realize real lies
but titanium has a cooler name, and it makes something sound more "advanced" if you hear it is made of titanium.
I voted steel. When my wife and I went shopping for wedding rings, the 'tungsten steel' ones looked alot cooler than the titanium ones.
.....however, I do prefer the titanium body piercing jewelry over the stainless steel jewelry, so maybe I should have null voted .
I am the Metatron
This is a very limited selection... what about carbon fibers, carbon nanotubes.. or spider silk? or those special glass alloys (I forgot their name, but they're the hot shit right now).
"Special glass alloys" is my favourite.
I like the menacing look of Titanium such as in skin sections of fighter aircraft. And I like the goldy color of Titnium Nitride.
Chrome-Moly Stainless Steel ( an Iron based substance ) came in a very, very close second.
When painting ( pictures ), both Titanium Dioxide and the Iron Oxides are so useful that they have to rate a tie as both being indespensible.
For what use? I like both. I have a Titanium wristwatch, and a titanium ring, but I wouldn't want a sword made out of it, although a friend has a rather nifty titanium diver's knife. As has been pointed out, steel is easy to obtain, and easy to work.
So it rather depends. Am I making a thousand of something, or just a few? What's my budget? ;-)
Titanium or Stainless Steel Watch?
Hi guys, I just bought a titanium watch and just found out it is about $100 more expensive from the exact model in stainless steel.
Is it worth the difference for some reason? or did I just waste $100 just to be able to say it is made out of titanium and show off?
I didn't know I had the option of material until after I paid..
Stainless Steel looks shinier and might have looked more posh on the watch and wristband whereas titanium is lighter in weight but darker in colour. I guess a few grams extra on a watch would not be worth $100 though..
Can someone enlighten me and tell me if it was worth it?
thanks in advance,
This article talks about bikes, but the arguments are valid for other industries. Our company uses titanium for its fatigue porperties.
Can titanium hold a cutting edge well?
As a backpacker, titanium wins, hands down. Light, strong, and most importantly, light.
All together, I'd go with steel then. It's also the only viable building material. Titanium is too rare, expensive, and hard to handle for structures of sufficient height.
Please use Sugar Cane Alcohol
I too thank Q for interesting reference. I will add one "pro-titanium" point (from memory, so not 100% sure but easy for some one to check).
Originally Posted by Prince_James
Many years ago, while summer student at LASL, I helped design a vacuum furnace. We used titanium for parts of it as it has better high temperature strength than steel. At the time, LASL was one of the few places in US where titanium could be welded. - It was sort of embarrassing as the Russians were routinely making some part (leading edges etc) of their jet fighters from titanium at the time. I think they still have large-scale titanium production capacity unmatched anywhere else in the world.
Originally Posted by spidergoat
Titanium doesn't resist shocks like steel can. It's more brittle. It's also far more difficult to wield, as welding titanium must be done in an oxygenless environment.
For instance, a titanium sword would be difficult to fix when it inevitably chipped. Lower carbon steel has the advantage of absorbng blows, which means it won't turn to fragments when you hit another piece of metal with it.
Valued Senior Member
On average, it is safe to say that the average strength of steels made is under that of titanium. However, the strongest steel is stronger than the strongest titanium.
Notice that even very expensive tools are still fabricated from steel, not titanium metal.
Steel is stiffer than titanium.
They both have similar fatigue properties - both exhibit fatigue limits.
I don't think so. Steel can be stiffer, if a lot of carbon is put in it. Otherwise, it's more maleable that titanium, which gives it a different sort of strength.
Originally Posted by Facial
Titanium is harder to machine that Stainless Steel, and fewer items are made in it, so it costs more. It's not a waste of cash, it has a certain curiosity value, and definitely earns geek points.
Originally Posted by apgrau
If you get scratches on your watch, give it a polish with a mild abrasive solution, like 'Brasso', the whole watch will take a lighter colour, and then an oxide layer will slowly form again, and your scratch, which was in the old oxide layer will have gone.
titanium is preferred for personal gadgets like jewelry, watches because it weighs less than steel but anticorrosive. it has a different purpose. I had my pick of a stainless steel fridge or a titanium one, i like the titanium finish because unlike steel it shows no fingerprints but i like the clear sheen of steel.