Why use glass in a reflecting telescope?

Discussion in 'General Science & Technology' started by DrZygote214, Feb 26, 2015.

  1. DrZygote214 Registered Member

    Messages:
    45
    I was just reading about some very large observatories being planned or under construction, and how these huge mirrors require up to 6 months to cool, or the glass will crack.

    So I have to ask the question, why use glass at all? My understanding of mirrors (for reflecting telescopes) is that they put the reflective coating on top of the glass, and it's that reflective coating that does all the reflection.

    This is different than a normal household mirror, which puts the reflective coating underneath the glass for protection, so then of course you need something transparent like glass. But I'm asking about telescopes, which put the coating on top.

    So why not just use steel, or some other stalwart material, and put the reflective coating on that?
     
  2. Google AdSense Guest Advertisement



    to hide all adverts.
  3. origin Heading towards oblivion Valued Senior Member

    Messages:
    11,888
    Good question. The reason is the Coefficient of Theremal Expansion (CTE). Glass does not expand or contract much with temperature in genral and the glass that is used in telescopes has a CTE very close to zero in the operational temperature range. You can imagine that a small change in shape of the mirror would be a big problem for the image quality.

    There are other materials that can be used but glass is still the best at this point.
     
  4. Google AdSense Guest Advertisement



    to hide all adverts.
  5. DrZygote214 Registered Member

    Messages:
    45
    I see. I was afraid it might have something to do with how the glass is grinded and made into an accurate shape, like maybe that's more difficult with other materials? But from what I've read about glass grinding, it seems not relatively easy anyway.

    This does raise other questions, however. What about aerogel? Or carbon-carbon? Too expensive?

    Also, we have adaptive optics nowadays, that vary the position and angle of the individual hexagon mirrors to adjust for atmospheric seeing. Is it possible to program in adjustments for thermal expansion/contraction?
     
  6. Google AdSense Guest Advertisement



    to hide all adverts.
  7. Billy T Use Sugar Cane Alcohol car Fuel Valued Senior Member

    Messages:
    23,198
    There have been a few attempts to make parabolic reflecting surface by spinning liquid mercury. When grinding glass, the surface shape easily produced is spherical, not parabolic as a spinning liquid's is. Unfortunately, it is very hard to spin a liquid without exiting tiny surface oscillations. What is needed is "highly viscous" mercury. Also that surface is horizontal so unless willing to only look straight up, you need a flat mirror* to make light fall vertically on to the Hg mirror. Looking straight up still lets you scan much of the heavens. For example + or - ~23.5 degrees in six months ( Tropic of Caner to Tropic of Capricorn is straight up, but moving so only very short exposures; however nearly linear "star-streak" lines could be reflected onto the entrance slit of a spectrograph.)

    Near zero thermal expansion glass is used because the glass must be very strong / thick if large to not distort under its own weight.** That means it is difficult to expose it to the night air's thermal changes without shape distortion - interior parts at different temperature than the surface makes for distorting forces. Thermal expansion its self is not a problem, if the temperature could be uniform through out the mass, but differential temperatures can not be avoided.

    Now days, there is little need of large single piece mirrors. Automation can keep surface of many separate ones on the same parabolic surface.

    * It is very cheap to make strong flat mirror - just slowly cool moltent glass. "Plate glass" can have a very flat surface if this is done.

    ** the back side of the glass is many hexagon holes to reduce weight, help keep interior at same temperature, and yet have very stiff / rigid mirror.
     
    Last edited by a moderator: Feb 26, 2015
  8. origin Heading towards oblivion Valued Senior Member

    Messages:
    11,888
    Most mirrors are of the 'ultra-light weight" versions so they do not have to be so thick, such as the hubble mirror. I have some knowledge about this because my wife worked on that fabrication of the Hubble mirror.

    Here is a picture of a ultra-light weight mirror.

    edit to add: Glass mirrors are typically ground to a paraboloid shape and not spherical.
     
    Last edited: Feb 26, 2015
  9. Billy T Use Sugar Cane Alcohol car Fuel Valued Senior Member

    Messages:
    23,198
    Thanks -You posted about when I was adding foot note to say the same.

    PS was that job at Perk& Elmer? If so, did she known they faked the tests that would have saved US many millions. - No need for astronauts to later add the "corrector plate."
     
  10. DrZygote214 Registered Member

    Messages:
    45
    In that case, can't some sort of heating system be applied? It wouldn't have to keep it very warm, just uniformly warm. Are observatories really so budget-constrained to be afraid of the electric bill involved with heating the primary mirror? Or maybe such heat would cause more atmospheric seeing near the mirror?

    My next idea will be to use steel, but surrounded by a thin layer of glass to protect it from fast thermal variation.

    Cool, was it the real mirror, or the backup? Also, does she know anything about how or why the main mirror got incorrectly shaped?
     
  11. Billy T Use Sugar Cane Alcohol car Fuel Valued Senior Member

    Messages:
    23,198
    Conceptually yes, but how can you keep the mirror surface both exposed to star light and uniformly warm.
     
  12. origin Heading towards oblivion Valued Senior Member

    Messages:
    11,888
    That would be incredibly difficult.

    You would have to match the CTE of the glass to the steel or the glass would shatter when it went into tension. So now you have a glass and steel mirror that will be changing shape all the time. Remember these telescopes have to be outside. At least the end of the telescope needs to be outside (even worse for delta T).

    I do not know the history of that particular mirror blank but I assume it was a reject.

    The grinder/polisher did not take into account the deflection of the blank from gravity, so when it was launched into orbit and no longer affected by gravity the shape changed slightly and the focus point was off by a small amount and could not focus properly. It was fixed on a subsequent repair flight.
     
  13. DrZygote214 Registered Member

    Messages:
    45
    Wait, are you saying that starlight, the points of light, cause a significant thermal variation on that point of the mirror? That would be hard to believe, seeing as how glass has one of the smallest CTE's known. Even for steel, that would be hard to believe. Maybe you're saying the dome interior is exposed to the atmosphere, and therefore there are variations of temperature inside?

    I don't see why. Just run a bunch of wires with resistors around the underside of the mirror, and maybe the rim too. Temperature sensors would be needed also, but this does not sound hard to me either. If computer control can do something as complex as adaptive optics, I don't see why it can't do something like adaptive thermal control (adaptive thermics?).

    If what I'm saying truly is insurmountable, then maybe we can imagine a completely enclosed dome with a flat windshield perpendicular to the telescope's direction. The purpose of being completely enclosed is to have a uniform temperature controlled environment so that we can use steel or something similar for the mirror. It would not be hard to rotate the enclosed dome along the horizon. It might be hard to rotate the telescope and windshield vertically while still preserving the sealed environment, but I think similar sealed rotations have been done in other devices (can't remember tho).

    EDIT: forgot to mention that the dome with telescope does not necessarily need a person inside. CCDs and computers can record all images and feed them to a nearby building.
     
    Last edited: Feb 26, 2015
  14. Russ_Watters Not a Trump supporter... Valued Senior Member

    Messages:
    5,051
    No: the mirror must be near exactly the same temperature as the surrounding air to prevent distortion of the image due to convection (making the stars twinkle more). Many telescopes are indeed equipped with cooling systems to help accomplish that.

    I retrofitted my telescope with a cooling system for that reason.
     
  15. origin Heading towards oblivion Valued Senior Member

    Messages:
    11,888
    What size and type telescope have you got?
     
  16. Billy T Use Sugar Cane Alcohol car Fuel Valued Senior Member

    Messages:
    23,198
    No. As stated before it is exposure to the nite-time air, normally falling in temperature. A large transparent glass cover could keep that air out, but not the cooling of the inner surface contacting air in side the telescope enclosure. Like wise wind pressure on the cover would not be steady but flexing it as it too thermally warps.
     
    Last edited by a moderator: Feb 26, 2015
  17. DrZygote214 Registered Member

    Messages:
    45
    I'm still confused. The mirror or mirror segments are still mounted onto some metal truss frame, such that the telescope can be rotated and pointed, right? So that metal frame undergoes thermal expansions/contractions that then mess up the position or shape of the mirror...?
     
  18. Billy T Use Sugar Cane Alcohol car Fuel Valued Senior Member

    Messages:
    23,198
    Not if it is a one-piece very rigid and strong near zero thermal expansion coefficient glass. If the mirror is many much cheaper to make pieces of glass each has its own frame with automatic control. - If these multi-mirror telescopes are ever placed on the air-less moon, the individual mirror could be a kilometer apart (don't need to look thur same air refraction) - then some great stellar interferometry would be possible.
     
  19. Russ_Watters Not a Trump supporter... Valued Senior Member

    Messages:
    5,051
    Looks like my optical tube has been discontinued, but it is an older version of this 11" SCT (Re-branded for Orion):
    http://www.telescope.com/Telescopes...finementValueIds=4527&refinementValueIds=4533

    But on this mount:
    http://www.telescope.com/Mounts-Tri...o-Telescope-Mount/pc/-1/c/2/sc/36/p/24338.uts

    In action:
    http://www.russsscope.net/

    Thermal management causes a host of problems that need to be addressed, even on the small scale like what I do: Air currents make stars twinkle, temperature changes overnight cause focus to drift, cameras need to be both cold and stable.
     
  20. Russ_Watters Not a Trump supporter... Valued Senior Member

    Messages:
    5,051
    It can if not done correctly, yes. I don't know for certain, but I suspect the mounts are adjustable so the light from the different segments can be collimated.

    ....Oh, found this:
    http://www.gmto.org/Resources/GMT-ID-01469-Chapter_8_Control.pdf
    Yeah, they've thought of everything.
     
  21. Bells Staff Member

    Messages:
    24,270
    Holy crap Russ!

    Amazing photos. You are living my dream!
     
    Russ_Watters likes this.
  22. danshawen Valued Senior Member

    Messages:
    3,951
    I still have the remnants of an 18" Dobsonian (reflector) in my basement which belonged to the late husband of my wife who was a project manager on the Hubble Space Telescope until his death in 2003. He was also an active amateur astronomer as well as a professional one for most of his young career. Our extended family inherited his shelves of books on lens grinding, optical tests for various kinds of lens and mirror aberrations, etc.

    This inspired me to finish construction of an inspection microscope (he didn't have one of those). Although I have constructed many refractor telescopes, I never attempted building anything like a reflector telescope on the scale that David did. His sons tell me his finished work on the Dobsonian had only a tiny optical imperfection he was unable to smooth out.

    I marvel at the many large ground based optical telescopes that are able to compensate for atmospheric effects that would otherwise yield only fuzzy pictures of the most distant objects observable from locations far from the light pollution nearby cities or the moon.

    But as is pointed out in the introductory post to this thread, one wonders if there might not be a lighter, more adaptive means for accomplishing the job of several tons of glass for a mirror assembly and its rigid support. A silvered mylar surface and servos to shape it mounted on a rigid rotating frame in the same configuration as a (cross-section of a) mirror is one idea. When I researched it, I could find no information about whether anyone had ever tried such an arrangement. Superconducting bearings also exist, and would be one possible means for acoustically isolating the rotating mirror assembly from ground vibration (by applying an error signal from nearby seismometers). It would not be easy, but this design would make possible relatively large mirrors without all of the weight of current ones. Combined with the ability to mitigate atmospheric effects, this design would be difficult to beat.

    Best of all, if the final form of the mirror had a minor optical imperfection, it could be easily repaired, unlike the very flawed design work Perkin Elmer did to the original design of the Hubble Space Telescope which required extreme measures to correct.
     
    Last edited: Mar 5, 2015

Share This Page